713-227-3251
fax 713-227-4117
info@eldredsheetmetal.com
Eldred Sheet Metal Works

 

 

Employment Opportunities

 

Eldred is always seeking highly qualified individuals to add to our current staff.  Feel free to stop by and fill out an application or you may submit your resume via email by emailing info@eldredsheetmetal.com.  In the event no positions are available for your skill set, applications will be kept on file for future reference.

Current Positions Available

Fitter/Welder

Eldred is seeking a Fitter/Welder responsible for fitting together metal sheet and plate parts and welding to fabricate partial or complete assemblies.

The qualified candidate will have minimum 1 year experience as a fitter/welder in a job shop environment using Flux Core (FCAW) or Solid Wire (GMAW).  Welding certification not necessary but is certainly a plus. 

In addition the following qualifications must be met:

-Able to pass a welding test.

-Able to read blue prints.

-Able to read a tape measure.

-Able to utilize jigs, holding fixtures, guides, and various other welding related equipment and tools.

-Able to layout and mark pieces for welding assemblies.

-Able to operate Flux Core (FCAW) or Solid Wire (GMAW) Mig Welder (set amperage, spool wire, connect gas, etc).

-Able to lift at least 75 lbs.

 

Additional qualifications but not required:

-Bilingual

-Able to TIG (GTAW) Weld.

-Able to drive a forklift or pass a forklift safety test.

-Possess or able to pass ASTM or AWS Welding certifications.

-Able to utilize iron worker, sheet and plate rolls, press brake, oxy-acetylene torch, and other related metal fabrication equipment.

Pay commensurate with experience.

Eldred is an Equal Opportunity Employer.

Press Brake Operator

Eldred is seeking a manual/hydraulic press brake operator responsible for forming/bending metal plate or sheet.

The qualified leadcandidate will have 5-10 yrs minimum experience operating a 125 Ton - 600 Ton mechanical or hydraulic press brake (Non CNC).  He/She will be able to able to layout flat layouts for braking angles, channels, and various parts for customer assemblies.  Candidate will also need to have knowledge of using other equipment such as sheet/plate shear, various rolls, ironworkers, grinders, etc.

In addition the following qualifications must be met:

-Able to read fractional tape measure.

-Able to read blueprints.

-Able to layout and mark pieces for forming.

-Knowledge of cone layout, transition layout, etc.

-Able to lift 75 lbs.

Additional qualification preferred but not required:

-bilingual

-Able to drive a forklift & pass a forklift safety test.

-Able to operate oxy-acetylene torch & other fabrication equipment.

Pay commensurate with experience.

Eldred is an Equal Opportunity Employer.

   

 

 

We now accept credit cards for your payment convenience.

For Employment Opportunities, click here