713-227-3251
fax 713-227-4117
info@eldredsheetmetal.com
Eldred Sheet Metal Works

 

 

New Equipment Additions

Eldred has added more equipment to better serve your needs.  With the addition of a 600 Ton 3/4" Plate X 12' Press Brake, an additional 1/2" X 6'-0" Roll, a Hypertherm High-Definition CNC Plasma table and a 10 Ton Capacity 2 trolley overhead crane, Eldred can handle larger plate bending jobs, increased capacity on rolling 16 Ga thru 1/2" Plate cylinders up to 10' -0" in Diameter, and handle larger jobs up to 10 Tons in our newly renovated shop area.

 

600 Ton Press Brake

With this new addition Eldred can bend material 10 Ga up to 3/4" Plate 12'-0".  Thicker material can be broke in shorter lengths.  Thinner plate and sheet can be formed up to 16'-0" with a maximum leg length of about 10".  This allows Eldred to serve heavy plate fabricators, ship repair yards, large vessel fabricators, and just about any industry requiring longer length bends.

 

1/2" X 72" Plate Roll

Eldred now has (2) - 1/2" X 72" Plate Rolls for increased capacity for rolling material 16 Ga up to 1/2" Plate. This new addition increases our capacity to roll cylinders and rings up to 10' in diameter. 

 

 

10 Ton Overhead Crane

Eldred has installed a new ProServ 10 Ton Overhead Crane with two 5 Ton Trolleys.  This overhead crane is in our newly renovated warehouse with our 600 Ton Press Brake and 1/2" Plate Roll and is also adjacent to our recently expanded weld shop.  With this new addition we can handle heavier plate for our press brake,High definition Plasma table and roll, increasing the weight capacity for our weld shop as needed. 

Hypertherm High-Definition Plasma

Eldred has now installed a new Hypertherm High-Definition CNC Plasma machine with true hole technology. With this new addition to our shop we can now service any of your sheet or plate cutting needs, with the best utilization of material. We have the technology to keep the cost low and the parts precise. Our new plasma machine is mounted on a 11 foot by 21 foot table. This coupled with our ProServ crane allows us to burn plate up to 2 inchs thick and edge cut up to 3 inch plate.

Send Eldred your request for quote and let us help you get started.

When you partner with Eldred you can be assured your project will be of the best quality. Our desire is to provide you with personal attention, better quality, and excellent service!

 

We now accept credit cards for your payment convenience.

For Employment Opportunities, click here